Specification

Color: Gray
Material: ABS
Assembly Required: Yes
Plug Type: EU Standard
Battery: Built-in 12V 1000~1600mAh Lithium Battery
Charging Time: 5-8h
Full Charge Use Time: 10-24h
Transmission Frequency: 5.6-6KHz
Signal Frequency: 360-440Hz
Search Range: 1000 m/ 3280.84 ft
Detection Depth: 20 m/65.62 ft
Host Size: 15*10*5.3cm/5.91*3.94*2.09 in
Detection Tube Length: 12cm/4.72 in
Handle Length: 11.5cm/ 4.53 in
Transmitter Size: 12*8*4cm/4.72*3.15*1.57 in
Package Size: 43*40*12cm/16.93*15.75*4.72 in
Gross Weight: 3.3kg/7.28 lbs
Net Weight: 3.14kg/6.92 lbs

Details

Clear Marks: They make it easy for you to see the mode you want to choose at a glance so that you can make a selection.

Carrying Case: The foam inside the carrying case ensures that the product will not be affected by collisions and moisture during transportation. The handle and latch are designed for easy carrying and opening, while also ensuring tightness.

Application

It can be used for security checks, beach treasure hunting, wilderness exploration, archaeological treasure hunting, etc. It can be used to detect artifacts, coins, rings, necklaces, screws, diamonds, gold bars, etc.

Package Included

1*Metal Detector
1*Transmitter
1*Charger
1*Disk
1*Carrying Case
1*English Manual

Notes

1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.After receiving the product, please charge it first (5-8 hours). Please pay attention to observe the status of the work light, if the work light is bright, it indicates that the machine power is sufficient, if the work light is dark, it indicates that the machine power is low, it is recommended to charge first, and then detect.
3.Please note that this product is not waterproof and should not be used in damp areas.
4.The use of this instrument in the presence of wind will be subject to certain interference. The use of this instrument is very much related to the operator's control of the scan.
5.Due to the presence of magnetic storms and solar aurora, the instrument must be commissioned for a period of time before it can be used normally. The receiver will continue to receive signals during this time, but the instrument will not respond. This situation is beyond the control of the product. It takes time to adapt.
6.It is more suitable for field operations, detection in the urban areas susceptible to interference, especially radio waves, so before using the product, please turn off the phone and remove metal objects like key chains.
7.Please note that two types of metals cannot be selected for testing at the same time, otherwise, it may cause damage to the instrument.
8.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.