433 MHZ four-button copy remote control

Product features: Duplicate your existing remote controls,

such as: garage door access control systems, gates, remote control curtains, car sunroof control, heating system control, light switches, etc.

Product features: Thin and compact, with a sliding cover to prevent accidental touch. Easy to use and efficient to copy

Powered by 27A 12V battery (included)

The copyable IC models are PT2260, PT2262, PT2264, PT1527, PT527, PT1587, PT1827, HS2260, HS2262, HS2264, HS2240, HS1527, HS527, HS1587, HS1827, RT2260, RT2262, RT2264, RT2240, RT1527, SC527, SC1587, SC1827, SC2260, SC2262, SC2264, SC2240, SC1527, SC527, SC1587, SC1827, EV2262, EV2264, EV2240, EV1527

If you fail in copying with proper operation, you might have to check whether your device has a chip above.

If IC chips can not match, it will not be copied, please verify the chip model before you buy.

Please make sure that the original remote control can be used normally

Make sure your remote control is 433 crystal frequency（1）

See if your chip is within our compatibility range（2

Copy the operation process

  ① Clearing codes operations

Just get the copy remote control and clear the code first,

Press and hold the above two buttons at the same time,The light flashed three times,Press the "B" button three times,Lights flash successfully.

After the code is cleared, press the button and the light does not turn on.

  ② Copy operations

Take out the original remote control that is not damaged and can be operated,

The two remote controls are close together for copy operation,Press the corresponding button at the same time,The copy remote control flashes and the copy is successful.

The other keys do the same to copy.  ③ Recovery code operations

If you accidentally clear the code,You can restore before the copy operation is performed,Press the following two buttons,The light flashes，successfully.