Product specifications:
Power supply: AC110-220V
Voltage adjustment: Discharge: 0.00-30.00 V, minimum step width 0.01 V
Charging: 0.00-22.00V, minimum step size 0.01V
Current setting: Discharge: 0.05-10.00 A, minimum step width 0.01 A (automatic current limitation when the power exceeds the limit)
Charging: 0.05-5.00 A, minimum step width 0.01 A (maximum current limited by supply current)
Discharge mode: DSC-CC: Constant discharge current for testing battery capacity or supply current
DSC-CP: Constant discharge power to simulate devices with constant power or to test the power supply
Charging method: Standard charging: support of nickel hydrogen, nickel chromium, lithium, iron lithium, lead acid
CHG-CV: Special charging with constant current and constant voltage, only for batteries
Automatic charging and discharging: Supports automatic charging, discharging and charging mode to test battery capacity
Voltage test: 0,002-4,500 V (low voltage) Accuracy is 0,003 V, error ± 0,5%
4,50 V ez30,00 V (high voltage) Accuracy up to 0,01 V, error ± 0,5%Current test: 0.05-10.000A, accuracy 0.005A, error ± 0.5%
Capacity test: 10Ah, resolution is 0,001Ah
10AH-100Ah, resolution is 0.01Ah
Over 100 Ah, resolution 0.1 Ah
Connection method: Four-wire detection, separate wiring of voltage and current channels to ensure measurement accuracy
LCD display: voltage, current, capacity, time, power, energy test data
Computer online: dedicated USB to TTL serial port (mini USB interface, non-ordinary USB cable), computer control, curve drawing, calibration benchmark test, firmware upgrade, cyclic charging and discharging.
Tip: A ZivV V is connected to the positive battery, A_V_ is connected to the negative battery

Legal information

Our products are shipped from German warehouses. DHL transport
If any problem, do not hesitate to contact us. We will serve you within 24 hours.
If you are not satisfied with our product, we will accept your return and refund you the refund.