Perfect service:
1. Our products are shipped from USA and Germany and can arrive quickly in 5-10 days.
2. If you have any questions, please contact us and I can provide you with return/refund/compensation/replacement.
3. Note: After sending the message, don't worry. Because of our time difference, we will respond to your message within 24 hours. 100% refund for quality problems and damage
Specification
Color: Green
Material: ABS, 45#Steel, Copper, Iron
Surface Treatment: Electroplating
Perforated Bead Size: 4-35mm/0.16-1.4in
Drill Bit Diamater: 0.3-4mm/0.01-0.16in
Type: Jewelry Tools
Assembly Required: Yes
Mount Type: Countertop
Power Source: Corded Electric
Number of Items: 1
Plug Type: EU Standard
Motor Model: DKJ-A
Power: 60-360W
Voltage: 220V
INPUT: 95V
AMP'S: 0.28 1.35
Motor Frequency: 50-60 Hz
Rotational Speed: 500-15000RPM
Thermal Cutoff: 150℃/302℉
Gross Weight: 5kg/ 11lbs
Product Size: 25*12*12cm/9.84*4.72*4.72inch
Package Size: 20*30*31cm/7.9*11.8*12.2in
Package Included
1 * Pearl Drilling Machine
1 * Pedal Switch
1* English and Chinese Instruction
1* Tool Box
All Accessories for Assembly
Notes
1. When using this product, please follow the instructions exactly. Before you start please tighten everything, including your pearls and needles at the same time make sure the drill has been fastened with a T-lock and is in the center position.
2. This product does not contain any pearls and is only suitable for punching holes for round beads with a diameter of 0.16-1.4in.
3. You can use a very small stream of water to prevent cracking and prevent the drill from being damaged.
4. Please punch holes and insert needles slowly to avoid twisting the needles or breaking the beads.
5. When installing the bottom, both left and right can be installed, so you can choose the direction according to your own habits.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
Key Features
Build to Last: The high-quality 45 steel drill chuck, ABS plastic body, aluminum, copper, and electroplating process make it effective, strong, and durable, extending its service life.
Safety Guard: Multiple heat dissipation holes and a maximum temperature of 302℉ can effectively ensure safety during operation, so you can use it with confidence.
Two Operations: You can control the pearl drill intermittently with a connected stepless speed switch or a foot switch, allowing you to focus on drilling and creating the perfect process.
High Efficiency: The 360W(maximum power) pure copper motor with high-speed rotor and low-noise bearing, 500-15000rpm adjustable speed, and stable structure can help you complete drilling work in a short period of time without damaging the pearls.
Complete Kit: The 20 pairs of collets (plastic+copper) stored in the toolbox are both convenient to carry and can reduce loss. You can use them to drill most round jewelry(0.16-1.4in)and save your costs.
Accurate Drilling: Its bead clamp diameter range is 0.01-0.16in, which can be used to drill holes for beads with a diameter of 0.16-1.4in. The depth regulator, hand wheel, auxiliary handle, rotary handle, and location screw allow you to adjust the tightness and height of the jig to adjust the position of the pearl to ensure the symmetry of the drilling and achieve precise drilling and is especially suitable for irregular long beads.
Stable and Firm: The four non-slip pads and rectangular base allow it to reduce the frequency of wobbling during drilling, while its magnetic holder ensures that drilling is more solid and stable.
Protective Shipping: In order to prevent the product from being damaged and bumped during transportation as much as possible, we fill the package with an anti-collision foam to protect your products to the maximum extent possible.
Premium Service: If you have any questions or are not satisfied with the product, please contact us immediately. Our support team will be available within 24 hours.
Details
Beads Holder: It allows this machine to hole in batches without cleaning out pearl powder chips regularly, preventing powder from blocking and ensuring a long-term normal use of the holing machine.
Foot Switch: Its foot switch allows you to free your hands and make it more convenient to use, and also ensures timely power off in case of emergency.
Protective Cover: It can effectively reduce powder splashing during operation and protect your safety to a certain extent
Application
It is suitable for drilling round beads with a diameter of 0.16-1.4in, and can drill holes in plastic, beeswax, amber, freshwater pearls, saltwater pearls, Tahitian black pearls, pearl oysters, coral, pearls, wood, jade, ceramics, metal, and other brittle and hard materials, and is ideal for use in jewelry stores, jewelry manufacturers, etc.
Installation
1. Install the depth regulator.
2. Installing auxiliary handle.
3. Install the bead collet.
4. Install speed adjustment switch and beads(not included).
5. Install bead holder.
6. Power on the product, adjust the distance and be ready to use.
