Perfect service: 
1. Our products are shipped from USA and Germany and can arrive quickly in 5-10 days.
2. If you have any questions, please contact us and I can provide you with return/refund/compensation/replacement.
3. Note: After sending the message, don't worry. Because of our time difference, we will respond to your message within 24 hours. 100% refund for quality problems and damage

Product Description

Strong Magnetic Sheet + Seal Design: Make sure the accuracy of the side hole is less than 0.5mm
Practical quick gripper: two clamping methods for precise and convenient punching
CNC computer engraving and forming: For precise and reliable products and precise punching
The eccentric wheel hole is precisely adjustable: The eccentric wheel hole position is adjusted according to the length of the connecting rod

Characteristic:
1. Adjustable drill guide rails to easily meet your drilling needs.
2. Equipped with a special rail, no clamping pliers are required to clamp the board when punching the side.
3. Equipped with 6/8 / 10 mm drill sleeve and twist drill to precisely drill holes of the appropriate size.
4. The drill sleeve is forged from high quality tool steel and has good strength and durability.
5. The strict and precise process ensures high precision and long service life.

Specification:
Drill guide material: aluminum alloy 6061
Drill housing material: Nitride tool steel
Drilling thickness: 10-180 mm
Side hole diameter: 15mm
Positive hole size: 6/8 / 10mm
Slider stroke: 5-90mm
Side hole stroke: 23-43mm
Please refer to the manual for further details.

Package list:
1 * advanced positioner
3 * 6mm drill sleeve
3 * 8mm drill sleeve
3 * 10mm drill sleeve
2 * knurled screw
1 * 6mm border ring
1 * 8mm border ring
2 * 10mm border ring
2 * star screw
1 * 15mm hole opener
1 * 6mm drill bit
1 * 8mm drill bit
1 * 10mm drill bit
1 * half moon key
1 * clamp plate
1 * slider set
1 * motherboard
2 * seal
2 * hex keys
1 * user manual

Note:
Since the slider slides 2mm each time, it can only be aligned with the center of the 10, 14, 18, 22mm and other sinkers. If the thickness of the plate is not this thickness, it will not be able to align with the center to punch holes without adding a gasket.