*100% brand new and high quality.

*Double head design - Both the left and right cutter heads are threaded, and the handheld handle can be mounted at either side, with one grip and one cut. If 1 side is blunt, you can change the other side.

*How to use - It should be installed on the rig for electric or pneumatic drills between 1500-3000 RPM, which is more powerful and eaier than ordinary boring tools and saws.

*Widely used - The aluminium cutters application include but are not limited to: sheet metal, corrugated materials, pipes, complex profiles, powder coating materials, bakelite, plastic, fiberglass, thin metal plates.

Specifications:

*Material: ABS Plastic

*Diameter: 17.5cm / 6.88inch

*Main Color: Orange

*Thickness allowed to cut:

Stainless steel plate: 1.2mm

Common steel plate: 1.8mm

Copper, aluminum plate: 2mm

Plastic, fiberboard: 2mm

Operations:

1.Fasten the plate(to be cut) onto an operating platform with a minimum distance of 15 between the place and the platform.

2.Fit the tool with an electric drill or any power drill by fastening the drill chuck.

3.Operate the tool when the motor runs.

4.Release the cutting bit when the motor keeps running.

5.Use special bit-cooling oil at operation.

6.See the picture below for more information when the tool is fitted to a drill.

Package Contents: 

1 x Double Gead Cutter

1 x Wrench

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.