Product Introduction

RF 433mhz Wireless Receiver

Product function: control the on/off of the circuit，Connect alternating current power.

It can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.

Used for lights, motors, water pumps, garage doors, access control systems, fans

Simple to use

Working voltage : AC 90V~220V

Output voltage = input voltage
Max current : 30A
Max load : 3000W
RF frequency : 433MHz(Same with Remote control)
Working temperature : -30~+80
Receiving Sensitivity : >97dbm
Amount of storage remote controls : about 25 pieces

RF433mhz Remote Control

Number of Buttons: 2

Comes with metal keychain

Batteries included

Up to 70 meters remote range ( theoretical distance ) .The more obstacles, the shorter the distance, the more serious the signal loss.

Support encoding : 1527 Leaning code
RF frequency : 433MHz

The wiring method is shown in the figure.

Output voltage AC 90~220V = Input voltage AC 90~220V

Schematic diagram of connecting an AC contactor①：LED indicator      ②：Learn button

Signal pairing

Before pairing, the receiver needs to be connected to the power supply.

Clearing codes

Press learning button 5 seconds,the data will be cleaned.All remotes cannot control this receiver.

To change the mode, the code needs to be cleared

Jog mode pairing

Function: Press the remote control to power on, release and power off

Step 1:Press learning button 1 times, the indicator light on the receiver  will turn on ,

Step 2:Press  "ON" button once, the indicator light on the receiver will flash on;Succeed.

Self-locking mode pairing

Function: Press the remote control to power on, then press again to power off

Step 1:Press learning button 2 times, the indicator light on the receiver  will turn on ,

Step 2:Press  "ON" button once, the indicator light on the receiver will flash on;Succeed.

Interlock mode pairing

Function: Press "ON" to power on, press "OFF" to power off

Step 1:Press learning button 3 times, the indicator light on the receiver  will turn on ,

Step 2:Press  "ON" button once, the indicator light on the receiver will flash on;

Step 3:Press "OFF" button once, the indicator light on the receiver will flash on;Succeed.

Various control methods

1 to 1, 1 to 2, 2 to 1, 1 to many