Product Description
Starting Method
1. Just add four-stroke gasoline engine oil to the oil tank to the bottom thread.
2. Add 93 unleaded gasoline to the fuel tank.
3. Press the oil bubble to pump oil until the oil bubble is full of fuel and the fuel return pipe returns oil.
4. Put the flameout switch in the "I" position (0 for flameout, I for start).
5. Toggle the damper upward to close the damper (hot start does not need to close the damper).
6. Pull the starter puller at a constant speed until it starts (if there is a start response after pulling 5 times but it fails to start, please pull the damper to the following to open the damper in pulling).
7. After the engine starts, pull the damper to the bottom to open the damper, slowly pull the throttle trigger, lightly add oil to the throttle and test whether it is normal.
Specification：
Color: Red, Silver
Material: PP, Aluminum Alloy, Manganese Steel, Nylon
Assembly Required: Yes
Usage: Side-mounted
Operating Noise: About 110db
Engine Size: 26*22*27cm/10.24*8.66*10.63in
Product Length: 1.75m/5.74ft
Gross Weight: 9kg/ 19.84 lbs
Package Size: 107*27*27 cm/42.13*10.63*10.63 in
Displacement: 43CC
Power: 1.25kw
Rotation Speed: 8500r/min
Engine Type: Single-cylinder Air-cooled 2-stroke Gasoline Engine
Carburetor Type: Diaphragm Carburetor
Gasoline Oil Mixing Ratio: 20-25:1
Idling Speed: 2800-3200r/min
Fuel Tank Volume: 1000ml /33.8 Oz
Package Included:
1 * Weed Wacker
1 * Oil Pot
1 Pair* Goggles
1 * Funnel
1 * Carrying Strap
1 * English Manual
All Accessories for Installation
Work Check:
1.Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.
2.Please check daily whether the air filter is too dirty. Please use pure gasoline to clean the air filter sponge.
3.Please check whether the throttle cable is stable in the carburetor position before work.
4.Please check whether the blade is in good condition before work, and do not use a damaged blade.
5.Before working, please check whether the grass baffle is in good condition, and replace the cracked and damaged grass baffle.
6.Please check whether the screws in each part are loose, and check and tighten them one by one with a wrench.
7. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
