Product Features:
Compact shape
Easy to use
Simple operation
Stable performance
Good effect
Product Description:
PLJ-0802 Embedded Intelligent Frequency Meter is a frequency measurement instrument designed for HAM. It is small and exquisite, easy to operate, reliable, mainly used for DIY transceiver for frequency value display, can also be used for conventional frequency measurement. The main features of this frequency meter are as follows:
⊙ A high-performance 1.2 GHz frequency meter with 8-bit microcontroller PIC16F648A as the core.
⊙ The built-in frequency reference is a temperature compensated voltage controlled crystal oscillator (±2.5 ppm VC-TCXO).
⊙ Dual IF design with separate presets for IF value and add/drop modes.
⊙ LCD0802 liquid crystal display with 7-digit numeric display and automatic blanking for invalid zero frequency value.
⊙ Anti-reverse power supply design, low power consumption battery power supply program.
⊙ Dual-key control with good human-machine interface.
⊙ The settings are automatically saved in EEPROM and can be directly recalled next time the power is turned on.
Technical parameters:
1. Gate time: 0.64 seconds
2. Measurement Channel:
Measurement range: 1 MHz ~ 1.2 GHz
Measurement accuracy: ± 100Hz
Channel sensitivity: (HM8134-2 data)
Test frequency (MHz) 5, 10, 30, 60, 100, 150, 200, 300, 450
Sensitivity (mV RMS) 35, 20, 10, 3, 3, 4, 8, 15, 12
Test Frequency (MHz) 500, 550, 600, 700, 800, 900, 1000, 1100, 1200
Sensitivity (mV RMS) 14, 30, 65, 80, 80, 35, 175, 270, 310
3. IF setting IF adjustable small step: 100 Hz, IF range: 0 ~ 999.9999 MHz, can be set to plus IF or minus IF mode.
4. frequency reference adopts 5032 sealed.000MHz temperature complementary voltage controlled crystal oscillator (VC-TCXO), frequency stability is ±2.5 ppm.
5. operating voltage DC input: DC 9V ~ 12V (with power reverse polarity protection)
6. Operating current enable backlight: ≤ 55 mA
7. Number of display bits: 8-bit digital display
8. Physical size: L×W×H: 58mm×32mm×27mm
9. Module mass: 40 g
10. On-board interface
RF INPUT (Measurement Signal Input): XH2.54-2P square socket
ICSP INPUT (MCU programming interface): XH2.54-6P socket
POWER INPUT: XH2.54-2P square socket
Product List:
1X Frequency Meter
2X cable
