Radio TV Broadcast Equipment's

Professional Eliminator Lightweight XR-140 QRM Eliminator X-Phase HF Bands Aluminum Alloy Case for Radio TV Broadcast Equipments
Features:
1. Convenience: The QRM canceller is inserted from the t rx into the feeder of the antenna without any other modification to the radio.
2.PPT Control: The box has a built-in PTT control to keep the canceller connected during transmission. However, an additional auxiliary receiving antenna is required, such as a 2m antenna or only a few meters of wire in the shed. The two antennas receive unwanted signals, resulting in different phases.
3. Adjustable: Allows adjustment of the phase angle and amplification to eliminate unwanted signals before reaching the front end of the receiver! It is based on a completely innovative concept and cannot be compared with normal "silencer" performance.
4. Material: The material is excellent, the shell material is aluminum shell, and the front and rear baffles are: epoxy glass fiber board FR4.
5. Customer Service: If you encounter problems during the purchase or use process, please contact us in time to solve the problem as soon as possible.

Specification:
Connections: Main Antenna, Auxiliary Antenna and 3xBNC for T RX.
RCA jacks for PTT are: approx 5.5x2.1mm
Required power supply: 13.8V/150mA
Shell material: aluminum + fiberboard
Size: about 124x113x51mm/4.88x4.45x2.01inch

Notice:
0.5-1mm deviation between dial and knob pointer
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.